Blackberry Email Setup doesn’t work after OS 6 update

So, I had my email accounts nicely setup on my Blackberry (on Vodafone but this is irrelevant).
I updated to OS 6 and both my email accounts continued to send/receive email absolutely fine.

However..

I later changed my email password for one of the accounts…

I received the usual message from blackberry a short time later telling me that it couldn’t access the Email account.
not a problem, i thought… i’ll just go into “Set-Up” then “Email Accounts” and change the password….
WRONG! … I clicked the Email Accounts icon… NOTHING! didn’t do anything!

“Bugger!” was the first thing i thought…

Eventually figured out that for some reason the Blackberry “Email Accounts / Email Setup” Application wasn’t even installed!

To rectify this very annoying problem…

  • 1. Simply plug your sync cable between your blackberry and pc
  • 2. Open the “Blackberry Desktop Software”
  • 3. Click “Applications” and find “Email Setup” in the list
    (see below)
    Blackberry-Email-Setup-Application-OS6
  • 4. If there’s a “+” button click this then click “Apply” at the bottom and it will install the Email Setup (takes a minute or two)
  • 5. Wait for your pc and blackberry to finish installing
  • 6. You should now be able to configure your email accounts on your blackberry!

Hope this helps you get ur email sorted on your BB, if it does or even if it doesn’t please tweet me

Toast Sandwich Diet – The Cheapest Diet Ever?

Toast sandwiches are a good way of saving money as well as calories.

Simply have one toast sandwich for lunch and nothing else.
Or for the less extreme approach have one for breakfast, one for lunch and one for dinner (only 990 calories per day)

Try it for a week or two and watch the weight fly off!

Ingreditents / Nutrition Information:
3 Slices of white bread (240 Calories)
10g Butter (90 Calories)
Total Calories: 330
Total Cost: About 7.5 Pence
You could make 13 Toast Sandwiches for one pound and still have 2.5p change!
The Toast Sandwich Diet costs less than 50p per week!

Carbohydrate: 55g
Protein: 9.5g
Fat: 12g
Fibre:4.5g
(Source: RSC)

How to make a Toast Sandwich:

  • 1. Toast a thin slice of bread
  • 2. Butter two slices of bread and sprinkle with salt and pepper to taste.
  • 3. Place the toast between the two slices of bread-and-butter to form a sandwich.

Healthy Variations:

  • Add an egg for more protein only adds about 8p to the cost PLUS keep you fuller for longer – also makes it taste a bit nicer.
  • Add half a can of sardines for more fat costs about 19p adds some fish to your diet and again helps you to feel fuller for longer.
  • For more nutrients try adding some vegetables, such as cucumbers or carrots or some tomatoes.
  • As a naughty treat add a small amount of grated cheese.

Recommended Daily Allowance
The new UK Department of Health Estimated Average Requirements (EAR) are a daily calorie intake of:

2079 calories per day for women (up from 1940)
2605 calories per day for men (up from 2550)

How many calories are needed each day can vary greatly depending on lifestyle and other factors.

Before making any changes to your regular diet i recommend that you talk to your doctor first so you can modify your diet program/plan based on known health issues together.

In the News:
BBC News: Toast sandwich is UK’s ‘cheapest meal’
The Guardian: The toast sandwich: can you jazz it up?

Update: Vodafone Mobile Connect software blocking websites?

Update 26/10/2011:

(Here’s the original post)

I emailed Vodafone with pretty much the same text as in my first post, here is the copied & pasted response…

Hello Alan,

Alan, as per your confirmation I have deleted your online account. As you are facing problems with the handset it needs to be checked manually to find out the exact error in your phone. I would recommend you to visit the nearest store to check your phone manually once; if the problem is negligible then it can be fix it there and then. If the problem persists please get back to us with the confirmation for postal repairs.

To know about nearest store please click here

In order to arrange for a postal repair please get back to us with the following details:
1. Make and model of your phone:
2. Colour of the phone
3. IMEI number of the phone. You can get the IMEI number by dialling *#06# on your phone.
4. Brief description of the problem you are facing with your phone
5. Alternate contact number and alternate address

Also, if you have any data on your phone that you wish to back up (including contacts), please do so before you visit the post office. If you are not sure how to do this, you will find more information in the handbook. Once the phone has been posted it isn’t possible to retrieve information stored on the phone and it may be lost during the repair process.

Furthermore, water or physical damage is not covered by the manufacturer’s warranty and upon receipt if the repair centre discovers that your phone is damaged due to physical or water damage then we will be unable to repair your phone and will return it to you un-repaired or inform you about the charges for repair.

Alternatively, you can call our Technical team on 08700700191 then select option 2 and then option 2 again. They will be able to assist you regarding this matter. You can call them any time between 10:00 a.m. – 5:00 p.m.

I trust I was cordiale enough in providing you the information.

Kind regards,

Kanika Dham
Vodafone Customer Services

Thankfully my online account has not actually been deleted!

Received a tweet from @VodafoneUK this morning saying:

Ive asked one of the team to pick up your eForum post this morning and they’ll be in touch shortly ^SM

Hoping someone will get back to me with some kind of coherent response.

As an aside, i’ve tried hunting for the latest version of the vodafone connect software, i managed to stumble (after about 45 mins of looking) upon a download link (in the business section of the website) but when clicked the link was dead!

Vodafone Mobile Connect software blocking websites?

Been having a problem for a while now…

We have various vodafone mobile connect devices in our company.
When the Mobile Connect software is installed on any of our user’s laptops they can connect to every site on the web except for our company websites. Sometimes it loads the web page title and stops other times it will just timeout.

We have a few sites hosted on the same (shared) IP address and all of these (including this site, as it’s on the same host) are inaccessble if the mobile connect software is installed. Even if we are connecting through our own wired or wireless office network.

I am certain that it is the vodafone mobile conect software causing this because as soon as the software is uninstalled our websites are instantly accessible again.

This is a very strange problem. I have googled it but havent found anyone else with this same problem.

Has anyone else had this problem? it’s obvioulsy a pain for our guys to keep uninstalling the software just to view our own websites and reinstalling when they leave the office.

I’ve emailed Vodafone today so will see what they say.

Single PHP error page to handle all response headers / errors

There might be an easier way of doing this but i’ve been working on a project which needed the following which i have done as a simple single php page and thought i’d share it in case anyone wants to do the same thing.

  1. Error page generated by dynamic pages
    (using any code; 403, 404 etc)
  2. Error page to handle genuine errors
    (404 ‘Not Found’, 403 ‘Forbidden’ etc)
  3. Forbid visitors from visiting sensitive areas/directories
    also returning 403 ‘forbidden’ header.
    (e.g. /images, /css /javascript, /ajax etc)

Download all these files: http-error-code.zip

instructions for use are commented within the error.php code but in summary:

You need to create a .htaccess entry for each error code:

Code for .htaccess:


ErrorDocument 403 /error/error.php
ErrorDocument 404 /error/error.php

For forbidden folders just add this code into a file called index.php then put this file into the folder that you want to forbid directory listing for:

Code for index.php:

<?php
// Set response code
$error = 403; //Forbidden
// include the error page (
include ($_SERVER['DOCUMENT_ROOT'].'/error/error.php'); // assuming "/error/error.php" is the location/name of this file
// stop processing the current page
exit();
?>

Save this code to a file called error.php and save to yourdomain.com/errors/error.php

Code for error.php:

<?php
/*
------------------------------------------
PHP Response Header / Error Page Generator
------------------------------------------
Created by Alan Hart (www.alanhart.co.uk)
19/09/2011
------------------------------------------

To generate response from another page, as a result of incorrect database query or invalid content etc just add this code:
(make sure no page output has been generated before this include)

<?php
// Set response code
$error = 403; //Forbidden
// include the error page (
include ($_SERVER['DOCUMENT_ROOT'].'/error/error.php'); // assuming "/error/error.php" is the location/name of this file
// stop processing the current page
exit();
?>

-------------------------------------------------------
TIP:
-------------------------------------------------------
Hide the default directory listing for a folder
e.g. /images, /css, /java etc.

1. create a blank file called index.php
2. paste the php code above into the file
3. place it inside the folder
-------------------------------------------------------
*/

// ------------------------------
// THE CODE...
// ------------------------------

// if the error code has been set by referring page:
if ($error <> ""){
// Use the error code from referring page
$code = $error;
} else {
// Use the error code from server
$code = $_SERVER['REDIRECT_STATUS'];
}

// set $path variable to the requested path/uri
$path = $_SERVER['REQUEST_URI'];

// Create array with error codes and messages
// You must add a line to .htaccess for each code used here.
// e.g.
// ErrorDocument 403 /error/error.php
// ErrorDocument 404 /error/error.php
// etc...
// (assuming /error/error.php is the location/name of this file)

// Common Error Codes / Responses:
$response['403'] = array('title' => '403 Forbidden', 'message' => 'The server has refused to fulfill your request.
You do not have permission to access '.$path.' on this server.');
$response['404'] = array('title' => '404 Not found', 'message' => 'The document/file requested was not found on this server.') ;
$response['405'] = array('title' => '405 Method Not Allowed', 'message' => 'The method specified in the Request-Line is not allowed for the specified resource.') ;
$response['408'] = array('title' => '408 Request Timeout', 'message' => 'Your browser failed to send a request in the time allowed by the server.') ;
$response['500'] = array('title' => '500 Internal Server Error', 'message' => 'The request was unsuccessful due to an unexpected condition encountered by the server.') ;
$response['502'] = array('title' => '502 Bad Gateway', 'message' => 'The server received an invalid response from the upstream server while trying to fulfill the request.') ;
$response['504'] = array('title' => '504 Gateway Timeout', 'message' => 'The upstream server failed to send a request in the time allowed by the server.') ;

// Other header response codes (not necessarily errors) that you may want to use:
// $response['100'] = array('title' => '100 Continue', 'message' => 'Continue')
// $response['101'] = array('title' => '101 Switching Protocols', 'message' => 'Switching Protocols')
// $response['200'] = array('title' => '200 OK', 'message' => 'OK') // *Not an error so should never be handled by this script*
// $response['201'] = array('title' => '201 Created', 'message' => 'Created')
// $response['202'] = array('title' => '202 Accepted', 'message' => 'Accepted')
// $response['203'] = array('title' => '203 Non-Authoritative Information', 'message' => 'Non-Authoritative Information')
// $response['204'] = array('title' => '204 No Content', 'message' => 'No Content')
// $response['205'] = array('title' => '205 Reset Content', 'message' => 'Reset Content')
// $response['206'] = array('title' => '206 Partial Content', 'message' => 'Partial Content')
// $response['300'] = array('title' => '300 Multiple Choices', 'message' => 'Multiple Choices')
// $response['301'] = array('title' => '301 Moved Permanently', 'message' => 'Moved Permanently') // *Not an error so should never be handled by this script*
// $response['302'] = array('title' => '302 Found', 'message' => 'Found')
// $response['303'] = array('title' => '303 See Other', 'message' => 'See Other')
// $response['304'] = array('title' => '304 Not Modified', 'message' => 'Not Modified')
// $response['305'] = array('title' => '305 Use Proxy', 'message' => 'Use Proxy')
// $response['307'] = array('title' => '307 Temporary Redirect', 'message' => 'Temporary Redirect') // *Not an error so should never be handled by this script*
// $response['400'] = array('title' => '400 Bad Request', 'message' => 'Bad Request')
// $response['401'] = array('title' => '401 Unauthorized', 'message' => 'Unauthorized')
// $response['402'] = array('title' => '402 Payment Required', 'message' => 'Payment Required')
// $response['406'] = array('title' => '406 Not Acceptable', 'message' => 'Not Acceptable')
// $response['407'] = array('title' => '407 Proxy Authentication Required', 'message' => 'Proxy Authentication Required')
// $response['409'] = array('title' => '409 Conflict', 'message' => 'Conflict')
// $response['410'] = array('title' => '410 Gone', 'message' => 'Gone')
// $response['411'] = array('title' => '411 Length Required', 'message' => 'Length Required')
// $response['412'] = array('title' => '412 Precondition Failed', 'message' => 'Precondition Failed')
// $response['413'] = array('title' => '413 Request Entity Too Large', 'message' => 'Request Entity Too Large')
// $response['414'] = array('title' => '414 Request-URI Too Large', 'message' => 'Request-URI Too Large')
// $response['415'] = array('title' => '415 Unsupported Media Type', 'message' => 'Unsupported Media Type')
// $response['416'] = array('title' => '416 Requested range not satisfiable', 'message' => 'Requested range not satisfiable')
// $response['417'] = array('title' => '417 Expectation Failed', 'message' => 'Expectation Failed')
// $response['418'] = array('title' => '418 I\'m a teapot', 'message' => '(RFC 2324) Hyper Text Coffee Pot Control Protocol')
// $response['501'] = array('title' => '501 Not Implemented', 'message' => 'Not Implemented')
// $response['503'] = array('title' => '503 Service Unavailable', 'message' => 'Service Unavailable')

// get the relevant title from array
$title = $response[$status]['title'];

// get the relevant message from array
$message = $response[$status]['message'];

// return message if error code provided isn't in the $codes array
if ($title == false || strlen($code) != 3) {
$message = 'Please supply a valid status code.';
}
// Return response header(s) with relevant code
header("HTTP/1.1 ".$title);

// Customise the page to be displayed below...

// -------------------------------------------------------
// You can use the variables $title and $message in the page
// -------------------------------------------------------
// e.g.
//        echo "<h2>".$title."</h2><p>".$message."</p>";
// -------------------------------------------------------

// -------------------------------------------------------
// !! IMPORTANT !!
// -------------------------------------------------------
// if you want to include a header / footer in the page displayed
// make sure you use $_SERVER['DOCUMENT_ROOT'] in your include code
// e.g.
//         include($_SERVER['DOCUMENT_ROOT']."/inc/header.php");
//
// this ensures the header/footer path is always correct
// e.g.
//        actual path of header.php = "http://www.domain.com/inc/header.php"
//         if path/uri is "domain.com/foo/" header path would incorrectly become "domain.com/foo/inc/header.php"
//        if path/uri is "domain.com/foo/bar/" header path would incorrectly become "domain.com/foo/bar/inc/header.php"
// -------------------------------------------------------

?>
<?php
// Include your own header here
//         include($_SERVER['DOCUMENT_ROOT']."/inc/header.php");
// or use HTML as below
?>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
<title>Error: <?php print $title;?></title>
</head>
<body>
<center>
<?php echo '<h2>'.$title.'</h2><p>'.$message.'</p>'; ?>
</center>
<?php
// Include your own footer here
//         include($_SERVER['DOCUMENT_ROOT']."/inc/footer.php");
// or use HTML as below
?>
</body>
</html>

 

connection to the server was reset in Hotmail, Firefox

Been having trouble logging into hotmail the last few days, after entering username and password, just get an error saying:

“The connection to the server was reset while the page was loading”

To clear this and actually log on to your hotmail just do the following:

if you have the “Web Developer Toolbar” plugin:
Click Miscellaneous > Clear Private Data > HTTP Authentication

If you don’t have the plugin:

  1. When in Firefox hold down:
    Ctrl + Shift + Del together
  2. Tick “Active Logins
  3. Click “Clear Now” button

Try and log into hotmail again and it will let you in, at last!

Google’s New Sitelinks

Sitelinks have been around for a while but used to look like this:
Old Style Sitelinks

Now they look like this!:
New Google Sitelinks for Microsoft
Within Google’s new search hierarchy, sitelinks will now be full-size links with a URL and a line of snippet text, similar to regular search results. But Google has also designated a maximum number of 12 sitelinks per search result, giving pride of place within the page to the first search result.

The changes will roll out globally to all modern browsers, including Chrome, Firefox, and Internet Explorer 7 and above, Google said.

Sitelinks are useful to users as they may not be able to specifically identify where in a site they want to visit, so he or she merely types in the overarching domain.

“It turns out that sitelinks are quite useful because they can help predict which sections of the site you want to visit,” Daniel Rocha, a software engineer on the Google Sitelinks team, wrote in a blog post. “Even if you didn’t specify your task in the query, sitelinks help you quickly navigate to the most relevant part of the site, which is particularly handy for large and complex websites. Sitelinks can also give you a good overview of a website’s content, and let webmasters expose areas of the site that visitors may not know about.”

Google has also said that it is tweaking its search algorithm to accommodate the changes. “In addition, we’re making a significant improvement to our algorithms by combining sitelink ranking with regular result ranking to yield a higher-quality list of links,” Rocha said. “This reduces link duplication and creates a better organized search results page. Now, all results from the top-ranked site will be nested within the first result as sitelinks, and all results from other sites will appear below them.”

Facebook enable dislike button wall post scam

Another facebook scam:

Users will see a wall post, supposedly from a friend.

The wall post says:

Facebook now has a dislike button! Click ‘Enable Dislike Button’ to turn on the new feature!”

facebook enable dislike button wall post

This is quite clever and looks exactly like it might be a genuine add-on, the “Enable Dislike Button” link appears exactly where the “Share” button appears on regular posts.

If you click on the link, the same wall post will be posted to all your friends’ walls, meaning that more and more people will be tricked the same way.

This is a scam. No “Dislike” button will be added anywhere.

Many Facebook users have been suggesting for quite a while now that facebook have a “Dislike” button so this scam is probably going to fool quite a few people people.

Please let everyone know about this “enable dislike button” scam and ensure your friends understand that they should be cautious of posts like this put on their walls, even from if they come from their own friends!

If you, or anyone you know, has this message posted on their wall, you can either hide it or mark it as spam. If you mark it as spam it helps Facebook to hopefully become aware of and remove this rogue application.

Access registry on another external hard drive

If you need to open a windows registry hive from an old/external/slave hard drive that has a windows installation on it.

I recently had a machine go down at work, wanted to get the user’s email up and running asap so i attached their hard dirve to my laptop using a usb to SATA adapter and exported their outlook account settings, which are stored in the registry and imported them into a new pc.
See my article: how to backup outlook 2007 account settings.

1. Open REGEDIT
2. single click to hightlight the HKEY_LOCAL_MACHINE branch.
3. in the menu click FILE and choose LOAD HIVE
4. browse to the location of the old registry hive.

where “x:\” is the drive of the slave/external hard drive…

“user” is located in x:\docs and Settings\user\NTUSER.DAT
make sure you open upper case “NTUSER.DAT” and not “ntuser.dat” if it exists.

other registry hives are located at x:\windows\system32\config

if you’re not sure or unclear on any of this, please comment and ask.